Ancast Stainless Steel Foundry Email Ancast
Home About Us Alloys Casting Capabilities Quoting Ancast Stainless Steel Foundry Quality System Facilities Directions to Ancast Contact Ancast
Stainless Steel Alloys Poured at Ancast

Corrosion Resistant Stainless Steel (ASTM A-743 & A-351)
Alloy
AISI#		 Specification Carbon
Max.		 Manganese
Max.		 Silicon
Max.		 Phosphorus
Max.		 SulFur
Max.		 Chromium
Min.-Max.		 Nickel
Min.-Max.		 Molybdenum
Min.-Max.		 Other
302 CF-20 .20 1.50 2.00 .04 .04 18.0 - 21.0 8.0 - 11.0 - -
303 CF-16F .16 1.50 2.00 .17 .04 18.0 - 21.0 9.0 - 12.0 1.5 Max. Se, .20 - .35
303 CF-16Fa .16 1.50 2.00 .04 .20 - .40 18.0 - 21.0 9.0 - 12.0 .40 - .80 -
304 CF-8 .08 1.50 2.00 .04 .04 18.0 - 21.0 8.0 - 11.0 * -
304L CF-3 .03 1.50 2.00 .04 .04 17.0 - 21.0 8.0 - 11.0 * -
316 CF-8M .08 1.50 2.00 .04 .04 18.0 - 21.0 9.0 - 12.0 2.0 - 3.0 -
316L CF-3M .03 1.50 1.50 .04 .04 17.0 - 21.0 9.0 - 13.0 2.0 - 3.0 -
316LN CF-3MN .03 1.50 1.50 .04 .04 17.0 - 22.0 9.0 - 13.0 2.0 - 3.0 N, .10 - .20
317 CG-8M .08 1.50 1.50 .04 .04 18.0 - 21.0 9.0 - 13.0 3.0 - 4.0 -
317L CG-3M .03 1.50 1.50 .04 .04 18.0 - 21.0 9.0 - 13.0 3.0 - 4.0 -
347 CF-8C .08 1.50 2.00 .04 .04 18.0 - 21.0 9.0 - 12.0 * Cb/Ta, 8 x C Min. - 1.0 Max
Alloy 20® CN-7M .07 1.50 1.50 .04 .04 19.0 - 22.0 27.5 - 30.5 2.0 - 3.0 Cu, 3.0 - 4.0
254 SMO® CK-3MCuN .025 1.20 1.00 .045 .01 19.5 - 20.5 17.5 - 19.5 6.0 - 7.0 Cu, .50 - 1.00; N, .180 - .240
AL-6XN® CN-3MN .03 2.00 1.00 .040 .01 20.0 - 22.0 23.5- 25.5 6.0 - 7.0 Cu, .75 Max; N, .18 - .26
Nitronic 50® CG6MMN .06 4.00 - 6.00 1.00 .04 .03 20.5 - 23.5 11.5 - 13.5 1.50 - 3.00 Cb, .10 - .30; V, .10 - .30
N, .20 - .40
* Molydbenum .50 Max. in ASTM A-351 Only

Duplex Stainless Steel (ASTM A-890)
Alloy
AISI#		 Specification Carbon
Max.		 Manganese
Max.		 Silicon
Max.		 Phosphorus
Max.		 SulFur
Max.		 Chromium
Min.-Max.		 Nickel
Min.-Max.		 Molybdenum
Min.-Max.		 Other
25-5 Gr. 1A CD4MCu .04 1.00 1.00 .04 .04 24.5 - 26.5 4.75 - 6.00 1.75 - 2.25 Cu, 2.75 - 3.25
ESCOLOY 45D® Gr. 2A CE8MN .08 1.00 1.50 .04 .04 22.5 - 25.5 8.00 - 11.00 3.00 - 4.50 N, .10 - .30
2205 Gr. 4A CD3MN .03 1.50 1.00 .04 .02 21.0 - 23.5 4.5 - 6.5 2.5 - 3.5 Cu, 1.00 Max; N, .10 - .30
ZERON 100® Gr. 6A CD#MWCuN .03 1.00 1.00 .03 .025 24.0 - 26.0 6.5 - 8.5 3.0 - 4.0 Cu, .50 - 1.0; W, .50 - 1.0
N, .20 - .30

Martensitic Stainless Steel (ASTM A-743)
Alloy
AISI#		 Specification Carbon
Max.		 Manganese
Max.		 Silicon
Max.		 Phosphorus
Max.		 SulFur
Max.		 Chromium
Min.-Max.		 Nickel
Min.-Max.		 Molybdenum
Min.-Max.		 Other
410 CA-15 .15 1.00 1.50 .04 .04 11.5 - 14.0 1.00 Max. .50 -
410 Mod. CA-6NM .06 1.00 1.50 .04 .03 11.5 - 14.0 3.0 - 4.5 .40 - 1.0 -
420 CA-40 .20 - .40 1.00 1.50 .04 .04 11.5 - 14.0 1.0 Max. 0.5 Max. -
442 CB-30 .30 1.00 1.50 .04 .04 18.0 - 21.0 2.00 Max. - -
446 CC-50 .5 1.50 1.50 .04 .04 26.0 - 30.0 4.00 Max. - -

Heat Resistant Stainless Steel (ASTM A-297)
Alloy
AISI#		 Specification Carbon
Max.		 Manganese
Max.		 Silicon
Max.		 Phosphorus
Max.		 SulFur
Max.		 Chromium
Min.-Max.		 Nickel
Min.-Max.		 Molybdenum
Min.-Max.		 Other
308 HF .20 - .40 2.00 2.00 .04 .04 18.0 - 23.0 8.0 - 12.0 .50 -
309 HH .20 - .50 2.00 2.00 .04 .04 24.0 - 28.0 11.0 - 14.0 .50 -
310 HK .20 - .60 2.00 2.00 .04 .04 24.0 - 28.0 18.0 - 22.0 .50 -
311 HN .20 - .50 2.00 2.00 .04 .04 19.0 - 23.0 23.0 - 27.0 .50 -
312 HE .20 - .50 2.00 2.00 .04 .04 26.0 - 30.0 8.0 - 11.0 .50 -
330 HT .35 - .75 2.00 2.50 .04 .04 15.0 - 19.0 33.0 - 37.0 .50 -
331 HU .35 - .75 2.00 2.50 .04 .04 17.0 - 21.0 37.0 - 41.0 .50 -
334 HW .35 - .75 2.00 2.50 .04 .04 10.0. - 14.0 58.0 - 62.0 .50 -
335 HX .35 - .75 2.00 2.50 .04 .04 15.0 - 19.0 64.0 - 68.0 .50 -
SUPERTHERM® - .40 - .60 .70 - 1.5 1.0 - 2.0 .03 .03 24.0 - 28.0 34.0 - 38.0 .50 Co, 14.0 - 16.0; W, 4.0 - 6.0
Fe, Bal.; Sn, .05 Max.
N-155 MULTI MET® - .20 Max. 1.0 - 2.0 1.00 .04 .03 20.0 - 22.5 19.0 - 21.0 2.50 - 3.50 W, 2.0 - 3.0; Cb, .75 - 1.25
Co, 18.5 - 21.0
 

Abrasion & Corrosion Resistant Iron (ASTM A-532 & A-436)
Alloy
AISI#		 Specification Carbon
Max.		 Manganese
Max.		 Silicon
Max.		 Phosphorus
Max.		 SulFur
Max.		 Chromium
Min.-Max.		 Nickel
Min.-Max.		 Molybdenum
Min.-Max.		 Copper
Min.-Max.
15-3 Class II, Type B 2.0 - 3.3 2.0 Max. 1.5 Max. .10 .06 14.0 - 18.0 2.5 Max. 3.0 Max. 1.2 Max.
20-2 Class II, Type D 2.0 - 3.3 2.0 Max. 1.0 - 2.2 .10 .06 18.0 - 23.0 2.5 Max. 3.0 Max. 1.2 Max.
27% Cr Class II, Type A 2.0 - 3.3 2.0 Max. 1.5 Max. .10 .06 23.0 - 30.0 2.5 Max. 3.0 Max. 1.2 Max.
Ni-Resist® Type 1 3.00 Max. 0.5 - 1.5 1.00 - 2.80 - 0.12 1.5 - 2.5 13.5 - 17.5 - 5.5 - 7.50
Ni-Resist® Type 2 3.00 Max. 0.5 - 1.5 1.00 - 2.80 - 0.12 1.5 - 2.5 18.0 - 22.0 - .50 Max

Nickel Base Alloys (ASTM A-494)
Alloy
AISI#		 Specification Carbon
Max.

Manganese
Max.

 Silicon
Max.		 Chromium
Min.-Max.		 Nickel
Min.-Max.		 Molybdenum
Min.-Max.		 Tungsten
Min.-Max.		 Copper
Min.-Max.		 Iron
Min.-Max.		 Other
HASTELLOY B2® N-7M .07 1.00 1.00 1.0 Max. Bal. 30.0 -33.0 3.75 - 5.25 - 3.00 Max. P, .040 Max.
S, .030 Max.
HASTELLOY C® CW-12MW .12 1.00 1.00 15.5 - 17.5 Bal. 26.0 - 18.0 2.50 - 3.50 - 4.75 - 7.5 P, .040 Max.
S, .030 Max.
V, .20 - .40
C-22 CX-2MW .02 1.00 .80 20.0 - 22.5 Bal. 12.5 - 14.5 1.0 Max. - 2.0 - 6.0 P, .025 Max.
S, .0250 Max.
V, .35 Max.
C-4 CW-2M .02 1.00 .80 15.0 - 17.5 Bal. 15.0 - 17.5 - - 2.0 Max. P, .03 Max.
S, .03 Max.
NICKEL CZ-100 1.00 1.50 2.00 - 95.00 Min. - - 1.25 Max. 3.00 Max. P, .03 Max.
S, .03 Max.
MONEL® M-35-1 .35 1.50 1.25 - Bal. - - 26.0 - 33.0 3.50 Max. P, .03 Max.
S, .03 Max.
Cb, 0.5 Max.
MONEL® M-35-2 .35 1.50 2.00 - Bal. - - 26.0 - 33.0 3.50 Max. P, .03 Max.
S, .03 Max.
Cb, 0.5 Max.
MONEL A® QQ-N-288 .35 1.50 2.0 - 62.0 - 68.0 - - 26.0 - 33.0 2.5 Max. Al, .50 Max.
MONEL D® (M-25S) .25 1.50 3.5 - 4.5 -- 60.0 Min. - - 27.0 - 33.0 2.5 Max. P, .03 Max.
S, .03Max.
MONEL E® (M-30C) .30 1.50 1.0 - 2.0 - 60.0 Min. - - 26.0 - 33.0 3.50 Max. P, .03 Max.
S, .03 Max.
Cb, 1.0 - 3.0
INCONEL 600® CY-40 .40 1.50 3.00 14.0 - 17.0 Bal. - - - 11.00 Max. P, .015 Max.
S, .015 MAx.
INCONEL 625® CW-6MC .06 1.00 1.00 20.0 - 23.0 Bal. 8.0 - 10.0 - - 5.0 Max. P, .015 Max.
S, .015 MAx.
Cb, 3.15 - 4.50
INCOLOY 800® ASTM A-351 CT-15C .05 - .15 .15 - 1.50 .50 - 1.50 19.0 - 21.0 31.0 - 34.0 - - - Bal. P, .03; S, .03
Cb, .50 - 1.50
 

Precipitation Hardening Alloys (ASTM A-747)
Alloy
AISI#		 Specification Carbon
Max.

Manganese
Max.

 Silicon
Max.		 Chromium
Min.-Max.		 Nickel
Min.-Max.		 Molybdenum Phosphorus
Max.		 Sulfur
Max.		 Copper
Min.-Max.		 Other
17-4 PH® CB7Cu-1 .07 .70 1.00 15.50 - 17.70 3.60 - 4.60 - .035 .03 2.50 - 3.20. Cb, .15 - .35; N, .05
15-5 PH® CB7Cu-2 .07 .70 1.00 14.0 - 15.50 4.50 - 5.50 - .035 .03 2.50 - 3.20 Cb, .15 - .35; N, .05

Carbon Steel

Alloy
AISI#		 Specification Carbon
Min.-Max.		 Manganese
Min.-Max.		 Phosphorus
Max.		 Sulfur
Max.		 Silicon
Min.-Max.		 Copper
Max.		 Nickel
Min.-Max.		 Chromium
Min.-Max.		 Molybdenum
Min.-Max.		 Vanadium
Max.
1025 ASTM A-216; WCB .30 Max. 1.00 Max. .04 .045 .06 Max. .03 .05 Max. .50 Max. .20 Max. .03
4140 ASTM A-915; 4140 .38 - .43 .70 - 1.10 .035 .04 .30 - .60 - .80 - 1.10 .15 - .25 -
4340 ASTM A-915; 4340 .38 - .43 .60 - .90 .035 .04 .30 - .60 - 1.65 - 2.00 .70 - .90 .20 - .30 -
8630 ASTM A-915; 8630 .28 - .33 .60 - 1.00 .035 .04 .30 - .60 - .40 - .70 .40 - .60 .15 - .25 -
1020 ASTM A-27; Grade 60-30 .03 Max. .60 Max. .05 .06 .80 Max. - - - - -
 

Tool Steel (ASTM A-597)
Cast
Alloy		 Carbon
Min.-Max.		 Manganese
Min.- Max.		 Silicon
Max.		 Sulfur
Max.		 Phosphorus
Max.		 Chromium
Min.- Max.

Molybdenum
Min.-Max.

 Vanadium
Min.-Max.		 Cobalt
Min.-Max.		 Tungsten Nickel
CA-2 .95 - 1.05 .75 1.50 .03 .03 4.75 - 5.50 .90 - 1.40 .20 - .50 - - -
CD-2 1.40 - 1.60 1.00 1.50 .03 .03 11.00 - 13.00 .70 - 1.00 .40 - 1.00 .70 - 1.00 - -
CH-13 .30 - .42 .75 1.50 .03 .03 4.75 - 5.75 1.25 - 1.75 .75 - 1.20 - - -
 

Cobalt Base Alloys

Specification

 Carbon
Min.-Max.		 Manganese
Min.- Max.		 Silicon
Max.		 Iron
Max.		 Molybdenum
Max.		 Nickel
Min.- Max.

Chromium
Min.-Max.

 Tungsten
Min.-Max.		 Cobalt
Min.-Max.		 Phosphorus
Max.		 Sulfur
Max.
HS-6® .9 - 1.4 1.0 Max. 1.5 3.0 1.5 3.0 Max. 27.0 - 31.0 3.5 - 5.5 Bal. .04 .03
HS-25® .05 - .15 1.00 - 2.00 1.00 3.0 - 9.00 - 11.00 19.00 - 21.00 14.00 - 16.00 46.00 - 53.00 .04 .04
HS-31® .45 - .55 - - 2.00 - 9.5 - 11.5 24.5 - 26.5 7.0 - 8.0 Bal. .04 .04

Registered Trademarks & Their Proprietors

Alloy 20® Carpenter Technology. 254 SMO® Avesta Sheffield. AL-6XN® Allegheny Ludlum Steel. Nitronic 50®, 17-4 PH®, 15-5 PH® Armco Steel Corp.

ESCOLOY 45D® Esco Corporation. Zeron 100® Mather & Platt Ltd. SUPERTHERM® Abex Corporation. MULTI MET®, HASTELLOY®, HS® Haynes International

Ni-Resist®, MONEL®, INCONEL®, INCOLOY® Inco Alloys International, Inc.

--- This listing is only a partial listing of Chemistries poured at Ancast, Inc. ---
Home | About Us | Alloys | Capabilities | Quoting | Quality System | Facilities | Directions | Contact